PRODUCT DATA SHEET
DESCRIPTION : AF 1002 is polypropylene compound with glass fiber content of 10% for general injection use . It exhibits toughness and resists dimensional changes due to weathering and temperature. The injection mold part surface has higher scratch resistance compared to mineral filled compound.
APPLICATIONS : Automotif under-bonnet application, cooling system expansion tank, fan mounting, washing machines components.
PROCESSING CONDITIONS :
- It is advisable to eliminate moisture at 90-95o for 2 - 3 hours. Use of hot runner system tends to minimize fibre degradation along runner and gates, thereby improving molding characteristic. Slow to moderate screw speed, 30-60 RPM, and low to moderate back pressure, 25-75 psi, is appropriate for glass reinforced grades.
- Cylinder Temperature 220o - 250o
- Mould Temperature 50o - 70o
TYPICAL PROPERTIES:
PHISYCAL |
VALUE |
UNIT |
METHOD |
Specific gravity |
0.89 - 1.02 |
g/cm3 |
ASTM D-792 |
Met Flow Rate |
4 - 8 |
g/10 min |
ASTM D1238 |
MECHANICAL |
VALUE |
UNIT |
METHOD |
Tensile Strength |
450 - 600 |
Kgf/cm2 |
ASTM D638 |
Elongation |
6.5 - 10.5 |
% |
ASTM D638 |
Flexural Strength |
875 - 1.075 |
Kgf/cm2 |
ASTM D790 |
Flexural Modulus |
24.500 - 28.500 |
Kgf/cm2 |
ASTM D790 |
Izod Impact |
10 - 14 |
Kg-cm/cm |
ASTM D256 |